1. Connection examples

CANbus

Esempio di collegamento dei moduli remotati al controllore

On the first (1) and on the last (3) device of the chain, the termination resistances must be inserted.
The cable shoes must be connected to ground by the fastons provided on the metal body.

To activate the internal termination resistance see paragraph Setup of CAN1 and CAN2 PORT Termination resistances

Esempio di collegamento di ingressi standard, più ingresso veloce PNP

Connection example of a PNP/Push Pull count input

Connection example of amperometric and voltmetric analog inputs

Connection example of potentiometric and voltmetric analog inputs

Connection example of protected outputs

Connection example of analog outputs